■ JWD has dual in-line package (DIP) configuration (14-pin DIP)
■ JWS has single in-line package (SIP) configuration
■ Low cost, dry reed reliability with various contact arrangements
■ Wave solderable and immersion cleanable molded epoxy package
■ Optional coil suppression diod

■ 1pole, 1A, 1form A (NO), 1 form C (CO）
■ 2.54mm terminal pitch same as I.C. socket terminal pitch
■ Gold overlay AgPd alloy contact suitable for low loads

■ Directly triggerable with TTL standard modules as ALS, HCT & ACT
■ Slim line 13.5x7.85mm (0.531x0.309”)
■ Switching current 1 A
■ Bifurcated 1 form C (CO) contact
■ Immersion cleanable
■ High sensitivity results in low nominal power consumption, 65 to 130mW for monostable and 30 to 150mW for bistable (latching)
■ Initial surge withstand voltage 2.5kV (2/10μs) meets the Bellcore Requirement GR-10891.5kV (10/160μs) meets FCC Part 6

■ Au clad contacts in a 1 Form C (CO) arrangement
■ Standard 0.1” (2.54mm) grid spacing in a DIP configuration
■ Standard or sensitive DC coils through 24 volts
■ High dielectric strength
■ Wash tight case
■ Quiet operation for security applications

■ 1pole, 1A, 1 form C (CO)
■ 2.54mm terminal pitch same as I.C. socket terminal pitc

■ Multi purpose relay
■ Small size permitting high packing density
■ 1 form C contact (1 CO, 1 changeover contact)n 200mW and 450mW coils
■ 1A and 3A contacts
■ High shock resistance of 30gn Ambient temperature for sensitive version up to 85°C
■ Immersion cleanable

■ Low profile, therefore particularly suited for flat pack components grouping
■ For relays with 1 or 2 form C (CO) contacts:
- creepage and clearance distances between contacts and frame >5mm or >10mm (depending on the relay version)
- dielectric strength between contacts and frame 4kVrms or 6kVrms

■ Telecom/signal relay (dry circuit, test access, ringing)
■ Slim line 14x9mm (.551x.354”)n Switching current 2A
■ 2 form C bifurcated contacts (2 CO)
■ High sensitivity results in low nominal power consumption, 80mW for high sensitive, 140mW for sensitive version
■ High mechanical shock resistance, up to 1500g survival

■ Telecom/signal relay (dry circuit, test access, ringing)
■ Slim line 15x7.5mm (.59x.295”)
■ Switching current 2An 2 form C bifurcated contacts (2 CO)
■ High sensitive 24V and 48V coil versions
■ Meets Telcordia GR 1089, FCC Part 68 and ITU-T K20, ≥ 2500V between coil and contacts

■ Telecom/signal relay (dry circuit, test access, ringing)
■ Slim line 15x7.5mm (.59x.295”)
■ Switching current 2An 2 form C bifurcated contacts (2 CO)
■ High sensitive 24V and 48V coil versions
■ Meets Telcordia GR 1089, FCC Part 68 and ITU-T K20, ≥ 2500V between coil and contacts

■ Slim line 15x7.3mm (.590x.287”)
■ 2 form C bifurcated contacts (2 CO), switching current 2A
■ High sensitivity for low power consumption, 80mW/140mW
■ High dielectric characteristic, up to 2100Vrms between open contact
■ High surge capability (1.2/50μs and 10/700μs) meets Telcordia GR 1089 and FCC Part 68, up to 2900V between open contacts, up to 6000V between coil and contacts
■ High mechanical shock, up to 1500g survival
■ Hermetically sealed (RT V)

■ Minimum board-space 60mm2n Slim line 10x6mm (0.39x0.24”) and low profile 5.65mm (0.222”)
■ Switching power 60W/62.5VA
■ Switching voltage 220VDC/250VAC
■ Switching current 2A
■ Bifurcated contacts
■ High mechanical shock resistance

■ Minimum board-space 60mm2
■ Slim line 10x6mm (0.39x0.24”) and
■ Low profile 5.65mm (0.222”)
■ Switching power 60W/62.5VA
■ Switching voltage 220VDC/250VAC
■ Switching current 2An Bifurcated contacts
■ High mechanical shock resistanc

■ Telecom/signal relay (dry circuit, test access, ringing)
■ Slim line 20x10mm (.795x.393”)
■ Switching current 2An 2 form C contacts (2 CO, 2 changeover contacts)
■ Bifurcated contacts
■ Meets FCC Part 68 and ITU-T K2

■ Standard telecom relay (ringing and test access)
■ Slim line 15x7.5mm (.590x.295”)n Max. switching current 5A
■ 2 form C bifurcated contacts (2 changeover contacts, 2 CO)
■ Immersion cleanable
■ High sensitivity for low power consumption 140mW/ 70mW
■ Single coil version with surge voltage resistance between contact and coil: 2.5kV (2/10μs) meets the Telcordia Requirement GR-1089, 1.5kV (10/160μs) meets FCC Part 68

■ Standard DIL relay
■ Dimensions 20x10x11mm (.795x.394x.433”)
■ Switching and continous current 3A
■ 2 form C contacts (2 CO, 2 changeover contacts)
■ Immersion cleanable
■ Four different coil sensitivities, 150mW, 200mW, 400mW, >500mWn Surge voltage resistance meets FCC Part 68 requirement: 1.5kV (10/700μs) between coil and contacts

■ Minimum board-space 60 mm2
■ Slim line 10x6mm (0.39x0.24”) and low profile 5.65mm (0.222”)
■ Switching power 60W/62.5VA
■ Switching voltage 220VDC/250VAC
■ Switching current 4An Bifurcated contacts
■ High mechanical shock resistance

■ Slim line 10x6mm, low profile 5.65mm and min. board-space 60mm2
■ Switching current 2/5A, switching power 60W/62.5VA and switching voltage 220VDC/250VAC
■ Low coil power consumption, 140mW standard, 100mW for high sensitive version, 50mW for ultra high sensitive version and 100mW for bistable version
■ High dielectric and surge capability up to 2500Vrms between open contacts and 2500Vrms between coil and contacts
■ High mechanical shock resistance up to 50g functional

■ Multi purpose relay
■ Highly reliable
■ Great variety of contact arrangements and materials to meet specific applications
■ Contacts for signal loads and currents up to 5 A
■ DC coil, operating voltage 1.5VDC to 125VDC; AC, latching and non-latching coils on request
■ Sockets for easy and quick mounting of relay

■ Multi purpose relay
■ Highly reliable
■ Great variety of contact arrangements and materials to meet specific applications
■ Contacts for signal loads and currents up to 5 A
■ DC coil, operating voltage 1.5VDC to 125VDC; AC, latching and non-latching coils on request
■ Sockets for easy and quick mounting of relay

■ Multi purpose relay
■ Highly reliable
■ Great variety of contact arrangements and materials to meet specific applications
■ Contacts for signal loads and currents up to 5 A
■ DC coil, operating voltage 1.5VDC to 125VDC; AC, latching and non-latching coils on request
■ Sockets for easy and quick mounting of relay

■ Highly reliable
■ Great variety of contact arrangements and materials to meet specific applications
■ Contacts for signal loads and currents up to 5An For AC operating only
■ Neutral, monostable

■ Strong magnet system and wide voltage range
■ Highly reliable
■ Contacts for signal loads and currents up to 5An DC coils operating voltage 6VDC to 220VDC; AC, latching and non-latching coils on request
■ Multi purpose relay
■ Great variety of contact arrangements and materials to meet specific applications
■ Sockets for easy and quick mounting of relay